How to enable Wake on LAN?

Step 1: Press the power button and continuously press F7 to enter the boot menu, then select “Enter Setup” to access the BIOS.
(Or press the Delete key repeatedly immediately after pressing the power button to enter the BIOS settings)

Step 2: The setup method varies slightly depending on the platform. Please follow the instructions according to your platform:
(1) Jasper Lake platform (N5105, N5095, N5100, N4500, e.g., Quieter3, PCG02 Pro, Overclock3, etc.)
Alder Lake-N platform (N95, N100, N97, N50, N200, e.g., Quieter4, PCG02 Pro, Overclock4, etc.)
Twin Lake platform(N150,e.g.,Quieter 4,Overclock 4, etc.):

Go to Advanced → Customer Exclusive Functions → Wake On LAN → Enabl

(2) Gemini Lake platform (J4125, J4105, N4020, N4000, e.g., Quieter2, PCG02, etc.):
Go to Chipset → Common Function → Wake On LAN → Enabled.

Step 3:Go to Save & Exit → Save Changes and Exit → Yes to save the changes and exit.
(Or press F4 to quickly save and exit.)

Step 4: Press Win + X to open Device Manager → find Network adapters → → right-click Realtek PCIe GBE Family Controller  → select Properties → switch to the Power Management tab → check “Allow this device to wake the computer” → click OK to save.(Example shown on Quieter 4C）

Step 5: Make sure the Mini PC and the device sending the Wake-on-LAN signal are on the same local network. Connect the Mini PC to the same router as the waking device using an Ethernet cable. When the Mini PC is powered off or in sleep mode, it can be remotely woken up via a Magic Packet on the LAN.